Problem while dial up with Linux Open Suse 10.2 and Nokia 2116

since i can set up my Linux Open Suse to dial up from Nokia 2116, i often found my modem is hang up by it's self. I guess the problem is because the modem (nokia 2116) become hot when i use to connect to internet. What i do next is i put my modem near to my fan and the modem never hang up and my connection run well :)

Linux OpenSuse 10.2 and internet

Hai, finnaly i can find my blog connect to other person blog. It's really happy to know that i can share my knowladge to people out there. Here is the screen shot of my blog at Kimmy RS


i am sorry i can write your full name because i don't understand japanese, but thanks to put my link at your blog :)

Update for Linux OpenSuse 10.2 and CDMA modem

Dear All, i think i still have some problem with my previous information about Linux OpenSuse 10.2 and Wvdial. After googling on internet during my office hour, i found this script "at+crm=1;+cso=33". Replace the AT+cso=33 with at+crm=1;+cso=33, Insya Allah you will soon see another world from your PC or laptop, and of course by using your Linux OpenSuse 10.2 and CDMA Phone cell

:)

Linux OpenSuse 10.2 and Wvdial

Hi, here is short tutorial to set up your Linux OpenSuse 10.2 get connect to CDMA modem to get internet access. I use Nokia CDMA 2116 and DKU-5 (not original) cable data. For the internet provider i use Starone.

1. Log on as root (administrator)
2. Connect Nokia CDMA 2116 and DKU-5 to usb port
3. Open Konsole and type dmesg, on my computer ( i use laptop Acer Travelmate 2420) you will find
something like this

usb 1-1: ark3116 converter now attached to ttyUSB0

This is mean that your Linux OpenSuse 10.2 recognize your Nokia CDMA 2116 modem and the DKU-5
cable data

4. Then type "wvdialconf /etc/wvdial.conf". Find someting like this :

Found a modem on /dev/ttyUSB0.
Modem configuration written to /etc/wvdial.conf.
ttyUSB0: Speed 230400; init "ATQ0 V1 E1 S0=0 &C1 &D2"

5. Ok, now open the wvdial.conf (i use kwrite) and make some change on this :

Modem = /dev/ttyUSB0 ----> fill based on information on step 3
Baud = 230400 ----> fill based on information on step 4
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 ----> fill based on information on step 4
Init3 = AT+cso=33 ----> if blank, fill with AT+cso=33
Area Code =
Phone = #777 ----> if you are in indonesia and use CDMA type #777
Username = starone ----> ask your phone/internet provider
Password = indosat ----> ask your phone/internet provider
Ask Password = 0
Dial Command = ATDT
Stupid Mode = 1
Compuserve = 0
Force Address =
Idle Seconds = 300
DialMessage1 =
DialMessage2 =
ISDN = 0
Auto DNS = 1
Modem Type = Analog Modem

6. Save your change and exit

7. Open the konsole again and type wvdial

8. The connection work fine if you find information like this :

CONNECT
~[7f]}#@!}!}!} }3}"}&} } } } }#}%B#}%}'}"}(}"W}0~
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Sun May 20 17:34:43 2007
--> pid of pppd: 4547
--> Using interface ppp0
--> pppd: #777
--> pppd: #777
--> pppd: #777
--> pppd: #777
--> pppd: #777
--> local IP address 10.242.30.198
--> pppd: #777
--> remote IP address 10.64.64.64
--> pppd: #777
--> primary DNS address 202.93.40.174
--> pppd: #777
--> secondary DNS address 202.155.0.10
--> pppd: #777
--> Script /etc/ppp/ip-up run successful
--> Default route Ok.
--> Nameserver (DNS) Ok.
--> Connected... Press Ctrl-C to disconnect
--> pppd: #777


I hope this information also work with your Linux. :)

Linux OpenSuse and CDMA modem

still having problem with my CDMA cell phone. i don't know where is wrong, at first time i guess that something wrong with signal from my cell phone...
here is the problem : the modem disconnect it's self after i type WVDIAL..

Open Source and Microsoft Windows

Yesterday i read article about microsoft claim on open source (http://detikinet.com/index.php/detik.read/tahun/2007/bulan/05/tgl/14/time/123407/idnews/780367/idkanal/317 -- these article was written in bahasa indonesia). This is really interesting for me since i don't know much about patent right or human intellectual right. I just know that when i use linux on my laptop there is some feature that like similar with microsoft windows on my PC at my office. I think what i use on my PC is the basic need of human to get easily interact with their PC or Laptop, in other word, microsft is one step ahead from Linux :)
...but i choose to use linux (open source) for my daily and simple activity because it's free

Internet with Linux OpenSuse 10.2 and Nokia 2116

finally i can set up my Linux OpenSuse 10.2 to get connect to internet using my CDMA phone cell. I still work on writing the instruction and i hope tomorrow i can share this information with all of you :).

Venus : VT-11

There is a new product for modem connection with CDMA technology name Venus : VT-11. Still few information about this product compatibility with OpenSuse OS. I am now waiting for feedback from one of user this product that i found on web :)